Level II C/I Electrician: Seal Cove Campus
- ELE-220 Job Planning
- ELE-225 Voltage Drop and Power Loss
- ELE-230 Environmental and Hazardous Installations
- ELE-235 DC Generating Systems
- ELE-240 Single-Phase AC Circuits II
- ELE-245 Protective Devices
- ELE-250 Extra-Low Voltage Transformers
- ELE-255 Low-Voltage Single-Phase Transformers
- ELE-260 Renewable Energy and Storage Systems I
- ELE-265 Exit and Emergency Lighting Systems
- ELE-270 Heating, Ventilation and Air-Conditioning Systems
- ELE-275 Heating, Ventilation and Air-Conditioning System Controls
- ELE-280 Electric Heating Systems
- ELE-285 Electric Heating System Controls
- ELE-290 Cathodic Protection Systems
- ELE-295 DC Motors I
- ELE-300 Motor Starters I
- ELE-305 Motor Control Devices I
- ELE-310 Drawings, Schematics and Specifications II
- ELE-315 Lightning Protection Systems
How it works
To register please contact your PDO at the Apprenticeship Division of Department of Advanced Education & Skills. More information is available at https://www.aesl.gov.nl.ca/app/
After you have been approved for your training by the Apprenticeship Division, AESL, please complete a
registration form and mail the form back to the Seal Cove Campus so you can be set up for online
access. Your instructor will contact you in advance of your start date. Please provide a telephone
number for us to contact you, as well as an email address that you regularly use.
Trades courses are typically broken down into two components: theory and practical. In many college and university programs, theory has been delivered online and through correspondence for many years. However, teaching the practical aspect online has traditionally been a challenge. While many online simulations are now possible, apprentices continue to need exposure to practical skills training to expand their knowledge as they work toward journeyperson certification. Your training will be carried out in two phases; providing a good balance of theory and practical learning.
Phase One: 21 weeks of Online Training (Dates TBD)
The initial phase of instruction will be more theory-oriented supplemented by some practical simulations and videos. Rather than having 30 hours of course work per week, which is typical of how blocks are normally taught, CNA is limiting content to 10 hours per week. This will enable you to continue working and have a more manageable amount of course work.
During the online phase of teaching, you will be given an orientation session to online learning. You will be assigned an instructor whose primary job is to make sure you are equipped to excel. Your instructor will have online lectures and notes prepared. S/He will conduct video conference seminars for individuals and groups, and will also be available to answer questions, either by phone, in an online classroom or by email. Students will be required to attend online videoconference sessions for 1-2 hours per week as scheduled by the instructor. Your instructor is here to support your success in every way possible.
Because of varied work schedules, we will try to make group sessions that work better for you. While participation in these is strongly encouraged, it may not be possible to participate in all of them, and that is okay. Your instructor will work with you to schedule time to help you not fall behind.
Phase Two: Two Weeks On-Campus (Dates TBD)
The second phase of your class call will be completed in person at Seal Cove Campus. You will be given two weeks of practical, intensive learning to cover the training objectives that are not compatible with online delivery. You will also have the opportunity to reinforce the learning from the online portion and prepare for the upcoming course and block exams. Classes generally run 8:30am to 3:30pm each day, Monday to Friday.
What if I run into computer issues?
We are not expecting students taking this program to be computer experts, however, some familiarity with computers and internet use will be very helpful.
A dedicated Help Desk support team is available to serve your technical support needs should you encounter difficulties. Our team members possess a wide range of technical skills and look forward to answering your questions, finding solutions to your problems and ensuring that your online experience is an enjoyable one. We aim to provide prompt courteous service within 24 hours.
Email: dlshelp@cna.nl.ca
Phone: 1 877 465 2250 option 1 (toll free) or 1 709 466 6961 (local)
The DL Helpdesk schedule can be found here
Who do I contact if I have additional questions?
A Student Development Officer has been assigned to help you throughout the training program. Should you have questions or require information at any point, please contact Natasha Quinlan at (709) 744-6841, or by email at natasha.quinlan@cna.nl.ca. Natasha will be able to direct your inquiry to either the appropriate campus, Distributed Learning officials, or to Brent Howell, as Dean of Engineering Technology & Industrial Trades. She is also able to direct you to assessments if you are still uncertain about taking courses online.
We appreciate your interest in taking the Construction/Industrial Electrician program at CNA, and we look forward to working with you over the coming year.